Forced Air Manifold
| 1. 1 1/2" Gate Valve |
8. 3/4" Gate Valve |
| 2. 1 1/2" x 2" Nipple |
8a. 3/4" Close Nipple |
| 3. 1 1/2" Tee | 9. 3/4" Tee |
| 4. 1 1/2" x 4" Nipple | 10. 3/4" x 1/4" Bushing |
| 5. 2" x 1 1/2" Coupling | 11. Propane Hose |
| 6. Forged Burner Tip | 12. Fisher 67-743 Regulator |
| 7. 1 1/2" x 3/4" Bushing | 13. 3/4" x 1/4 Bushing |
| 7a. 3/4" Close Nipple |
Not Shown: 0 - 5 lb. Pressure gauge. It screws in
to #13. |
Notes:
1. The burner tip is forged from 2" black pipe. Forge the
last 3" down to 7/8" I.D. See below.
2. The blower attaches to #1.
3. The blower should be 110 cfm @7" H2O
4. The valves are for flow control only. Use a proper shut-off on the gas line.
5. Teflon tape and pressure test all fittings.
6. Use this information at your own risk! No warranty for design, or suitability for any use or application is expressed or implied!
2. The blower attaches to #1.
3. The blower should be 110 cfm @7" H2O
4. The valves are for flow control only. Use a proper shut-off on the gas line.
5. Teflon tape and pressure test all fittings.
6. Use this information at your own risk! No warranty for design, or suitability for any use or application is expressed or implied!
E-Mail: tim@tzknives.com
©2006 Zowada Custom
Knives